Miele PWM 908 DV Washer Manual

The Miele PWM 908 DV is a high-performance washer designed for both residential and commercial use. It features advanced washing technology, energy efficiency, and a variety of wash programs to suit different fabric types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Large capacity drum, energy-efficient motor, multiple wash programs, user-friendly interface, and advanced water management system.

Feature	Description
Large Capacity Drum	Accommodates large loads for efficient washing
Energy-Efficient Motor	Reduces energy consumption while maintaining performance
Multiple Wash Programs	Customizable settings for different fabric types
User-Friendly Interface	Intuitive controls for easy operation
Advanced Water Management	Optimizes water usage for each cycle

Installation

Unpack and inspect contents. Ensure proper placement on a stable surface.

Connect water supply: Attach hoses to the cold and hot water inlets.
Level the washer: Adjust feet to ensure the washer is level.
Plug into AC power: Ensure proper voltage and grounding.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts to configure settings.

Select language: Choose preferred language from the menu.
Set water hardness: Adjust settings based on local water quality.
Run a test cycle: Ensure all functions are operating correctly.

CAUTION! Ensure the washer is properly installed before use.

Specifications

Model: Miele PWM 908 DV.
Capacity: 9 kg.
Energy Rating: A+++.
Spin Speed: Up to 1600 RPM.
Dimensions: 85 x 60 x 65 cm.
Power Supply: 220-240V, 50Hz.
Weight: 100 kg.

Controls and Settings

Access settings via the digital display. Controls include start/pause, program selection, and temperature adjustment.

Wash Programs: Cotton, Synthetics, Delicates, Wool, and Quick Wash.

Connecting Water Supply

Ensure proper connection to both hot and cold water supplies.

Turn off water supply before connecting hoses.
Check for leaks after connection.
Ensure hoses are securely fastened.

Tip: Use new hoses for best results.

Operating the Washer

Follow the instructions for selecting wash programs and starting the cycle.

Load laundry: Do not overload the drum.
Select desired program: Use the control panel to choose.
Start the cycle: Press the start button to begin washing.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

CAUTION! Unplug before performing any maintenance tasks.

Regulatory Information

This appliance complies with all relevant safety and performance standards. For support, visit www.miele.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer does not start	No power supply	Check power connection and circuit breaker.
No water supply	Hoses kinked or blocked	Inspect hoses and ensure water supply is on.
Excessive vibration	Washer not leveled	Adjust feet to level the washer.
Door does not open	Cycle not complete	Wait for cycle to finish before opening.

Reset: Refer to the user manual for reset instructions.

Service: Contact Miele customer service for assistance.