Miele PWM 908 Washer Manual

The Miele PWM 908 is a high-performance washing machine designed for commercial use, featuring advanced technology for optimal cleaning results. It offers a variety of wash programs, energy efficiency, and user-friendly controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Large capacity drum, advanced wash programs, energy-efficient motor, user-friendly interface, and robust construction.

Feature	Description
Large Capacity Drum	Accommodates large loads for efficient washing
Advanced Wash Programs	Multiple settings for different fabric types
Energy-Efficient Motor	Reduces energy consumption while maintaining performance
User-Friendly Interface	Intuitive controls for easy operation
Robust Construction	Designed for durability in commercial environments

Installation

Unpack and inspect contents. Ensure proper placement on a level surface.

Connect water supply: Attach hoses to the appropriate inlet valves.
Connect drain: Ensure proper drainage setup.
Plug into AC power: Verify voltage compatibility.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts for initial configuration.

Select language: Choose preferred language from the menu.
Set water hardness: Adjust settings based on local water quality.
Run a test cycle: Ensure all functions operate correctly.

CAUTION! Ensure stable surface; avoid overloading the washer.

Specifications

Load Capacity: 9 kg.
Spin Speed: Up to 1600 RPM.
Energy Efficiency: A+++ rating.
Dimensions: 85 cm x 60 cm x 60 cm.
Power Supply: 220-240V, 50Hz.
Water Consumption: 50 liters per cycle.
Noise Level: 48 dB during washing.

Controls and Settings

Access the control panel for program selection and settings adjustment.

Buttons: Power, Start/Pause, Program Selection, Temperature Control, Spin Speed Adjustment.

Display: Shows cycle time, selected program, and error messages.

Connecting Water Supply

Ensure proper connection to hot and cold water supply.

Turn off water supply before connecting hoses.
Match hoses to corresponding inlet valves.
Check for leaks after connection.

Tip: Use new hoses for best results.

Operating the Washer

Follow the steps to operate the washer effectively.

Load laundry: Do not exceed maximum load capacity.
Select wash program: Choose based on fabric type.
Start the cycle: Press the Start button to begin.
Monitor progress: Check display for cycle status.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance ensures optimal performance.

CAUTION! Unplug the washer before performing maintenance.

Regulatory Information

Complies with international safety standards. For support, visit www.miele.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer does not start	Power supply issue	Check power connection and circuit breaker.
No water filling	Hoses kinked	Ensure hoses are straight and connected properly.
Excessive noise	Unbalanced load	Redistribute laundry evenly in the drum.
Cycle not completing	Door not closed	Ensure door is securely closed before starting.
Water leakage	Loose connections	Check and tighten all hose connections.

Reset: Use the reset function in the menu if available.

Service: Contact Miele customer support for assistance.