Miele PWM 916 RH Washer Manual

The Miele PWM 916 RH is a high-performance washer designed for optimal cleaning efficiency and fabric care. With advanced technology, it offers a variety of wash programs, energy-efficient operation, and user-friendly controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash programs, energy-efficient motor, user-friendly interface, and advanced water management system.

Feature	Description
Large Capacity Drum	Accommodates large loads for efficient washing
Multiple Wash Programs	Customizable settings for different fabric types
Energy-Efficient Motor	Reduces energy consumption while maintaining performance
User-Friendly Interface	Intuitive controls for easy operation
Advanced Water Management	Optimizes water usage for each load

Installation

Unpack and inspect contents. Place the washer on a stable surface.

Connect water supply: Attach hoses to the water inlet.
Connect drain: Ensure proper drainage setup.
Plug into AC power.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts.

Select language: Choose preferred language on the display.
Program settings: Set up preferred wash programs.
Test run: Perform a test cycle without laundry.

CAUTION! Ensure stable surface; avoid overloading the washer.

Specifications

Model: Miele PWM 916 RH.
Capacity: 9 kg.
Energy Rating: A+++.
Dimensions: 850 mm x 600 mm x 600 mm.
Power Supply: 220-240V, 50Hz.
Weight: 90 kg.
Noise Level: 47 dB (Wash).

Controls and Settings

Access settings via the digital display. Controls include program selection, temperature settings, and spin speed adjustments.

Program Options: Cotton, Synthetics, Delicates, Wool, and more.

Connecting Water Supply

Ensure proper connection to the water supply.

Turn off the water supply before connecting hoses.
Match hoses to the correct inlet ports.
Check for leaks after connection.

Tip: Use Teflon tape on threads to prevent leaks.

Operating the Washer

Load laundry, select program, and start the washer.

Open the door and load laundry evenly.
Select the desired wash program.
Press start to begin the wash cycle.

WARNING! Do not overload the washer; it may affect performance.

Maintenance and Care

Regularly clean the filter and door seal. Run a maintenance wash periodically.

CAUTION! Unplug before performing maintenance.

Regulatory Information

This appliance complies with relevant safety and environmental regulations. For support, visit the Miele website or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer not starting	Power supply issue	Check power connection and circuit breaker.
No water supply	Hoses kinked	Ensure hoses are not kinked or blocked.
Excessive noise	Unbalanced load	Redistribute laundry evenly in the drum.
Door not closing	Obstruction	Check for items blocking the door.

Reset: Refer to the user manual for reset instructions.

Service: Contact Miele customer service for assistance.