Miele PWM 920 SI-SD Washer Manual

The Miele PWM 920 SI-SD is a high-performance washer designed for efficiency and durability. It features advanced technology for optimal cleaning results, a variety of wash programs, and user-friendly controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash programs, energy-efficient design, user-friendly interface, and advanced water management system.

Feature	Description
Large Capacity Drum	Accommodates large loads for fewer wash cycles
Multiple Wash Programs	Variety of settings for different fabric types
Energy Efficiency	Low water and energy consumption
User-Friendly Interface	Intuitive controls for easy operation
Advanced Water Management	Optimizes water usage for each load

Installation

Carefully unpack the washer and inspect for any damage. Place the washer on a stable, level surface.

Connect the water supply: Attach hoses to the water inlet.
Connect the drain: Ensure the drain hose is properly positioned.
Plug into a power source: Ensure the outlet is grounded.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts to set preferences.

Select language: Choose your preferred language from the menu.
Set water hardness: Adjust settings based on local water quality.
Run a test cycle: Ensure all functions are operating correctly.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Miele PWM 920 SI-SD.
Capacity: 9 kg.
Energy Rating: A+++.
Dimensions: 85 x 60 x 60 cm.
Weight: 80 kg.
Power Supply: 220-240V, 50Hz.
Water Consumption: 50 liters per cycle.

Controls and Settings

Access the control panel to select wash programs, adjust settings, and monitor progress.

Control Features: Start/Stop button, program selector, display panel, and delay start option.

Connecting Water Supply

Ensure the water supply is turned off before connecting hoses.

Attach the inlet hose to the washer and the water supply.
Check for leaks after turning on the water supply.
Ensure the drain hose is securely positioned to prevent backflow.

Tip: Use Teflon tape on threaded connections to ensure a tight seal.

Operating the Washer

Follow the instructions to select a wash program and start the cycle.

Load laundry: Do not overload the drum.
Select wash program: Choose based on fabric type.
Start the cycle: Press the Start button to begin.
Monitor progress: Check the display for cycle status.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the filter: Remove and rinse under water.
Check hoses: Inspect for wear and replace if necessary.
Run a maintenance wash: Use a cleaning cycle every few months.

CAUTION! Unplug the washer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and outlet.
No water supply	Hoses kinked	Ensure hoses are straight and not blocked.
Unusual noise	Load imbalance	Redistribute laundry evenly in the drum.
Water leaking	Loose connections	Check hoses and tighten connections.
Cycle not completing	Power interruption	Check for power outages or tripped circuit breakers.

Reset: Refer to the user manual for reset instructions.

Service: Contact Miele customer service for assistance.