Miele PWM908DPSS Washer Manual

The Miele PWM908DPSS is a high-performance washer designed for efficiency and durability. It features advanced technology for optimal cleaning results, multiple wash programs, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Large capacity drum, energy-efficient motor, multiple wash cycles, intuitive control panel, and advanced water management system.

Feature	Description
Large Capacity Drum	Accommodates large loads for fewer washes
Energy-Efficient Motor	Reduces energy consumption while maintaining performance
Multiple Wash Cycles	Customizable settings for various fabric types
Intuitive Control Panel	User-friendly interface for easy operation
Advanced Water Management	Optimizes water usage for efficient washing

Installation

Unpack and inspect contents. Ensure the washer is placed on a stable and level surface.

Connect water supply: Attach hoses to the washer and water source.
Connect drain: Ensure the drain hose is properly positioned.
Plug into power: Connect to a grounded electrical outlet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts to configure settings.

Select language: Choose your preferred language on the control panel.
Set water hardness: Adjust settings based on local water quality.
Run a test cycle: Perform a test wash to ensure proper operation.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Miele PWM908DPSS
Capacity: 2.6 cu. ft.
Power Supply: 120V, 60Hz
Water Consumption: 12 gallons per cycle
Energy Efficiency: ENERGY STAR certified
Dimensions: 33.5" H x 23.5" W x 25" D
Weight: 200 lbs.

Controls and Settings

Access the control panel to select wash cycles, adjust settings, and monitor progress.

Control Options: Start/Stop, Cycle Selector, Temperature Control, Spin Speed, Delay Start.

Connecting to Water Supply

Ensure proper connections to avoid leaks and ensure optimal performance.

Turn off the water supply before connecting hoses.
Match hoses to corresponding inlet valves (hot/cold).
Check for leaks after connections are made.

Tip: Use Teflon tape on threads to ensure a tight seal.

Operating the Washer

Follow the instructions for selecting wash cycles and starting the machine.

Load laundry: Do not overload the drum.
Select desired cycle: Use the cycle selector on the control panel.
Press Start: Begin the wash cycle.
Monitor progress: Check the display for cycle status.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance and longevity.

Clean the lint filter regularly.
Check hoses for wear and replace if necessary.
Run a maintenance wash monthly to keep the drum clean.

Regulatory Information

This washer complies with all applicable safety standards and regulations. For support, visit www.miele.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and circuit breaker.
No water filling	Hose kinked	Ensure hoses are straight and not blocked.
Excessive vibrations	Unbalanced load	Redistribute laundry evenly in the drum.
Door won't open	Cycle not complete	Wait for cycle to finish before opening.

Reset: Refer to the user manual for reset instructions.

Service: For assistance, contact Miele customer service.