Miele T 6351 Washer Manual

The Miele T 6351 is a high-efficiency washer designed to provide exceptional cleaning performance while being gentle on fabrics. It features multiple wash programs, advanced technology for optimal water and energy use, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash programs, energy-efficient design, user-friendly controls, and advanced water management system.

Feature	Description
Large Capacity Drum	Accommodates large loads for fewer washes
Multiple Wash Programs	Customizable settings for various fabric types
Energy Efficiency	Designed to minimize water and energy consumption
User-Friendly Controls	Intuitive interface for easy operation
Advanced Water Management	Optimizes water usage for each load

Installation

Carefully unpack the washer and inspect for any damage. Ensure the installation area is level and stable.

Connect the water supply: Attach hoses to the washer and water source.
Level the washer: Adjust the feet to ensure stability.
Plug into a grounded outlet: Ensure proper electrical connection.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts to configure settings.

Select language: Choose your preferred language from the menu.
Set water hardness: Adjust settings based on local water quality.
Run a test cycle: Ensure the washer operates correctly before use.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Miele T 6351
Capacity: 7 kg
Energy Rating: A+++ (most efficient)
Dimensions: 85 cm x 60 cm x 63 cm
Weight: 80 kg
Power Supply: 220-240V, 50Hz
Water Consumption: 50 liters per cycle
Noise Level: 48 dB (during wash)

Controls and Settings

Access the control panel for program selection and settings adjustments. The panel includes buttons for power, program selection, and additional options.

Display: LED display for cycle status and time remaining.

Settings include temperature control, spin speed, and additional rinse options.

Connecting Water Supply

Ensure the water supply is turned off before connecting hoses.

Attach the inlet hose to the washer and the water supply.
Check for leaks after connection.
Turn on the water supply and check for proper flow.

Tip: Use Teflon tape on threaded connections to prevent leaks.

Operating the Washer

Load laundry into the drum, select the desired program, and press start.

Load clothes: Do not overload the drum.
Select wash program: Choose based on fabric type.
Press start: The washer will begin the selected cycle.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance ensures optimal performance. Clean the filter and door seal regularly.

CAUTION! Unplug the washer before performing maintenance.

Regulatory Information

This appliance complies with all relevant safety and environmental regulations. For more information, visit the Miele website or contact customer support.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer does not start	Power supply issue	Check power connection and outlet.
No water in drum	Water supply issue	Ensure water supply is turned on and hoses are connected.
Excessive noise	Unbalanced load	Redistribute load evenly in the drum.
Door will not open	Cycle not complete	Wait for cycle to finish or check for error codes.
Leaks	Hose connection	Check and tighten hose connections.

Reset: Refer to the user manual for reset instructions.

Service: Contact Miele customer support for assistance.