Miele W 1918A Washer Manual

The Miele W 1918A is a high-efficiency washing machine designed for optimal performance and energy savings. It features advanced wash programs, a large capacity drum, and innovative technology to ensure your laundry is cleaned thoroughly and gently. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash programs, energy-efficient operation, user-friendly controls, and advanced water management system.

Feature	Description
Large Capacity Drum	Accommodates large loads for fewer wash cycles
Multiple Wash Programs	Customizable settings for different fabric types
Energy Efficiency	Designed to minimize water and energy consumption
User-Friendly Controls	Intuitive interface for easy operation
Advanced Water Management	Optimizes water usage for each load

Installation

Unpack and inspect contents. Ensure the washer is placed on a level surface.

Connect water supply: Attach hoses to the washer and water source.
Connect drain: Ensure the drain hose is properly positioned.
Plug into AC power: Use a grounded outlet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts to configure settings.

Select language: Choose your preferred language on the display.
Set water hardness: Adjust settings based on local water quality.
Run a test cycle: Ensure the washer operates correctly.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Miele W 1918A.
Capacity: 8 kg.
Energy Rating: A+++.
Dimensions: 85 cm (H) x 59.6 cm (W) x 63.6 cm (D).
Weight: 90 kg.
Water Consumption: 50 liters per cycle.
Power Supply: 220-240V, 50Hz.
Operating Temperature: Standard room temperature.

Controls and Settings

Access settings via the control panel. Key controls include Start/Pause, Program Selection, and Temperature Adjustment.

Display: Shows selected program, time remaining, and error messages.

Connecting Water Supply

Ensure the water supply is turned off before connecting hoses.

Attach the inlet hose to the washer and the water supply.
Check for leaks after connection.
Ensure the drain hose is securely positioned in the drain.

Tip: Use Teflon tape on threaded connections to prevent leaks.

Operating the Washer

Follow these steps to operate the washer:

Load laundry: Do not overload the drum.
Select wash program: Choose based on fabric type.
Start the cycle: Press the Start button to begin.
Monitor progress: Check the display for time remaining.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the detergent drawer regularly.
Check and clean the filter periodically.
Run a maintenance wash to keep the drum fresh.

CAUTION! Always unplug the washer before performing maintenance.

Regulatory Information

This appliance complies with all relevant safety and environmental regulations. For support, visit www.miele.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer does not start	Power supply issue	Check power connection and outlet.
No water supply	Hoses kinked or turned off	Ensure hoses are straight and water supply is on.
Excessive vibrations	Unlevel installation	Adjust the feet to level the washer.
Door will not open	Cycle not complete	Wait for the cycle to finish or check for errors.
Odor in drum	Residual moisture	Run a maintenance wash with vinegar.

Reset: Refer to the user manual for reset instructions.

Service: Contact Miele customer service for assistance.