Miele W 3844 WPS Allerwash Washer Manual

The Miele W 3844 WPS Allerwash is a high-performance washing machine designed specifically for allergy sufferers. It features advanced technology to ensure thorough cleaning while being gentle on fabrics. With a variety of wash programs, including a special Allerwash cycle, this washer effectively removes allergens and provides optimal care for your laundry. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Large capacity drum, energy-efficient motor, user-friendly interface, multiple wash programs, and advanced water management system.

Feature	Description
Allerwash Program	Special cycle designed to remove allergens from fabrics
Energy Efficiency	High energy rating for reduced electricity consumption
Large Capacity	Can handle up to 8 kg of laundry in one load
Quiet Operation	Designed for minimal noise during washing
Smart Control	Remote monitoring and control via Miele app

Installation

Unpack and inspect contents. Place on a stable surface and ensure proper leveling.

Connect water supply: Attach hoses to the water inlet.
Connect drain hose: Ensure proper drainage setup.
Plug into AC power: Ensure the outlet is grounded.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts to select language and preferences.

Set water hardness level: Adjust according to local water quality.
Program wash cycles: Familiarize yourself with available options.
Run a test cycle: Use an empty load to ensure proper operation.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Miele W 3844 WPS Allerwash.
Capacity: 8 kg.
Energy Rating: A+++.
Dimensions: 85 cm x 59.6 cm x 63.6 cm.
Water Consumption: 50 liters per cycle.
Spin Speed: Up to 1600 RPM.
Noise Level: 47 dB (washing), 73 dB (spinning).

Controls and Settings

Access the control panel for selecting wash programs, adjusting settings, and starting the cycle.

Display: LED screen showing cycle time and status.

Buttons: Start/Stop, Program selection, Temperature adjustment, Spin speed adjustment.

Connecting Water Supply

Ensure proper connection to the water supply for optimal performance.

Turn off the water supply before connecting hoses.
Check for leaks after connections are made.
Ensure the drain hose is positioned correctly to avoid backflow.

Tip: Use Teflon tape on threaded connections to prevent leaks.

Operating the Washer

Follow the instructions for loading laundry and selecting appropriate wash cycles.

Load laundry evenly in the drum.
Select the desired wash program and options.
Press Start to begin the wash cycle.

WARNING! Do not overload the washer to ensure effective cleaning.

Maintenance and Care

Regular maintenance is essential for optimal performance and longevity.

Clean the detergent drawer regularly.
Check and clean the filter as needed.
Run a maintenance wash periodically to keep the drum fresh.

CAUTION! Always unplug the washer before performing maintenance.

Regulatory Information

This appliance complies with all relevant safety and environmental regulations. For support, visit www.miele.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer does not start	Power supply issue	Check power connection and outlet.
No water supply	Hoses kinked or closed	Ensure hoses are straight and water supply is open.
Excessive vibrations	Unbalanced load	Redistribute laundry evenly in the drum.
Door does not open	Cycle not complete	Wait for cycle to finish before opening.

Reset: Refer to the manual for reset instructions if necessary.

Service: Contact Miele customer service for further assistance.