Miele W 863 Washer Manual

The Miele W 863 is a high-efficiency front-loading washing machine designed for optimal cleaning performance. It features multiple wash programs, energy-efficient operation, and advanced technology for fabric care. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Front-loading design, multiple wash cycles, energy-efficient operation, and advanced fabric care technology.

Feature	Description
Multiple wash programs	Customizable settings for different fabric types
Energy efficiency	Low water and energy consumption
Quiet operation	Designed for minimal noise during cycles
Delay start	Allows scheduling of wash cycles
Child lock	Prevents accidental operation by children

Installation

Unpack and inspect contents. Place on a stable surface and ensure proper leveling.

Connect water supply: Attach hoses to the water inlet.
Connect drain hose: Ensure proper drainage setup.
Plug into AC power: Use a grounded outlet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow on-screen prompts to select language and preferences.

Set water hardness level: Adjust according to local water quality.
Program wash cycles: Customize settings for your laundry needs.
Test run: Perform a test cycle to ensure proper operation.

CAUTION! Ensure stable surface; use two people for handling if necessary.

Specifications

Model: Miele W 863
Capacity: 7 kg
Energy Rating: A+++ (highest efficiency)
Dimensions: 85 cm (H) x 59.5 cm (W) x 63.6 cm (D)
Weight: 80 kg
Water Consumption: 50 liters per cycle
Spin Speed: Up to 1400 RPM
Power Supply: 220-240V, 50Hz

Controls and Settings

Access the control panel for wash cycle selection, temperature settings, and additional options.

Buttons: Start/Pause, Program Selection, Temperature Control, Spin Speed Control.

Additional settings include delay start, fabric care options, and rinse settings.

Connecting Water Supply

Ensure proper connection to both hot and cold water supplies.

Turn off water supply before connecting hoses.
Match hoses to corresponding inlet valves.
Check for leaks after connection.

Tip: Use new hoses for best results.

Operating the Washer

Follow the instructions for selecting wash programs and starting the machine.

Load laundry: Do not overload the drum.
Select desired wash program: Use the control panel.
Press Start: The washer will begin the selected cycle.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the detergent drawer regularly.
Check and clean the filter periodically.
Run a maintenance wash every few months.

CAUTION! Unplug the washer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and outlet.
No water filling	Hoses kinked or blocked	Inspect hoses and ensure water supply is on.
Excessive vibration	Unbalanced load	Redistribute laundry evenly in the drum.
Door won't open	Cycle not complete	Wait for cycle to finish or reset.

Service: For further assistance, contact Miele customer service.