Miele WSD 663 Selection Washer Manual

The Miele WSD 663 Selection Washer is a high-efficiency washing machine designed to provide exceptional cleaning performance while being gentle on fabrics. It features various wash programs, advanced technology for optimal water and energy use, and a user-friendly interface. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple wash programs, energy-efficient design, intuitive control panel, and advanced water management system.

Feature	Description
Large Capacity Drum	Accommodates large loads for fewer washes
Multiple Wash Programs	Customizable settings for different fabric types
Energy Efficiency	Designed to minimize water and energy consumption
Intuitive Control Panel	User-friendly interface for easy operation
Advanced Water Management	Optimizes water usage based on load size

Installation

Unpack and inspect contents. Ensure the washer is placed on a stable, level surface.

Connect water supply: Attach hoses to the washer and water source.
Connect drain: Ensure the drain hose is properly positioned.
Plug into AC power: Use a grounded outlet.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow the on-screen prompts to select your preferred settings.

Select language: Choose your preferred language from the settings menu.
Set water hardness: Adjust settings based on local water quality.
Run a test cycle: Perform a test wash to ensure proper operation.

CAUTION! Ensure the washer is level to avoid vibrations during operation.

Specifications

Model: Miele WSD 663 Selection.
Capacity: 8 kg.
Energy Rating: A+++.
Water Consumption: 50 liters per cycle.
Spin Speed: Up to 1600 RPM.
Dimensions: 85 cm x 60 cm x 63 cm (H x W x D).
Power Supply: 220-240V, 50Hz.
Weight: 85 kg.

Controls and Settings

Access the control panel to select wash programs, adjust settings, and monitor the wash cycle.

Control Features: Start/Pause, Program Selection, Temperature Control, Spin Speed Adjustment.

Connecting Water Supply

Ensure proper connection of water supply hoses to avoid leaks.

Turn off the water supply before connecting hoses.
Ensure hoses are securely attached to both the washer and the water source.
Check for leaks after turning the water supply back on.

Tip: Use new hoses if replacing old ones to ensure a secure connection.

Operating the Washer

Follow the instructions to operate the washer effectively.

Load laundry: Do not overload the drum.
Select wash program: Choose the appropriate program for your load.
Start the wash: Press the Start button to begin the cycle.
Monitor progress: Check the display for cycle status.

WARNING! Do not open the door during operation.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the detergent drawer regularly.
Check and clean the filter as needed.
Inspect hoses for wear and replace if necessary.

CAUTION! Unplug the washer before performing maintenance.

Regulatory Information

This appliance complies with all relevant safety and environmental regulations. For support, visit www.miele.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer does not start	Power supply issue	Check power connection and outlet.
No water supply	Hoses kinked or blocked	Inspect hoses for kinks and ensure water supply is on.
Excessive vibrations	Washer not level	Adjust feet to level the washer.
Clothes not clean	Incorrect wash program	Select appropriate wash program for fabric type.
Door will not open	Cycle not complete	Wait for cycle to finish before opening the door.

Reset: Refer to the user manual for reset instructions.

Service: Contact Miele customer service for assistance.