Miele WWR 860 WPS Washer Manual

The Miele WWR 860 WPS is a high-performance washing machine designed for efficiency and convenience. It features advanced technology for optimal cleaning results, including a variety of wash programs, energy-efficient operation, and user-friendly controls. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Large capacity drum, energy-efficient motor, multiple wash programs, Wi-Fi connectivity, and a sleek design.

Feature	Description
Large Capacity Drum	Accommodates large loads for fewer washes
Energy-Efficient Motor	Reduces energy consumption while maintaining performance
Multiple Wash Programs	Customizable settings for different fabric types
Wi-Fi Connectivity	Remote control and monitoring via smartphone app
Quiet Operation	Designed for low noise levels during washing

Installation

Carefully unpack the washer and inspect for any damage. Place the washer on a level surface and ensure proper ventilation.

Connect the water supply: Attach hoses to the hot and cold water faucets.
Level the washer: Adjust the feet to ensure stability.
Plug into a grounded outlet: Ensure the power supply matches the washer's requirements.

WARNING! Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer and follow the on-screen prompts to configure settings.

Select language: Choose your preferred language from the menu.
Connect to Wi-Fi: Follow instructions to connect the washer to your home network.
Run a test cycle: Use the default settings to ensure proper operation.

CAUTION! Ensure the washer is properly leveled before use.

Specifications

Model: WWR 860 WPS
Capacity: 9 kg
Energy Rating: A+++ (most efficient)
Dimensions: 85 cm (H) x 59.6 cm (W) x 63.6 cm (D)
Spin Speed: Up to 1600 RPM
Water Consumption: 50 liters per cycle
Power Supply: 220-240V, 50Hz

Controls and Settings

Access the control panel for program selection, temperature settings, and spin speed adjustments. The display provides feedback on cycle progress and remaining time.

Program Selector: Choose from various wash cycles tailored for different fabrics.

Delay Start: Set a timer for when you want the wash to begin.

Connecting Water Supply

Ensure the washer is connected to both hot and cold water supplies for optimal performance.

Turn off the water supply before connecting hoses.
Attach hoses securely to prevent leaks.
Check for kinks or bends in the hoses.

Tip: Regularly inspect hoses for wear and replace if necessary.

Operating the Washer

Load laundry into the drum, select the desired program, and start the wash cycle.

Open the door and load clothes evenly.
Add detergent to the designated compartment.
Press the start button to begin the wash cycle.

WARNING! Do not overload the washer to ensure effective cleaning.

Maintenance and Care

Regular maintenance is essential for optimal performance. Clean the filter and drum periodically.

CAUTION! Unplug the washer before performing any maintenance tasks.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power supply issue	Check power connection and outlet.
No water filling	Hoses kinked or blocked	Inspect hoses and ensure water supply is turned on.
Excessive vibration	Unbalanced load	Redistribute laundry evenly in the drum.
Door won't open	Cycle not complete	Wait for the cycle to finish before opening.

Service: For further assistance, contact Miele customer service.